Capsule Section
Hand filling machine with Loader
capsule in the loading
plate for manually operated capsule filling machine, hence
it take normally 5 minutes to load empty capsule in 300 holes.
OUTPUT: Fill 300 holes plate in 30 seconds give an output
of 36,000 capsule per/hour.
INTERCHANGEABILITY: The machine is Manufactured to
suit the following capsule size combination 00/0/1/2/3 or 4/5
FEATURES: Low investment high output significant difference
in your production department eazy to operate, can be handled
by semi skilled person. No setting system for any change part.
TECHNICAL SPECIFICATION: Drive ¼ HP 3 phase, 440 volts,
the machine stop automatically after loading is complete.
Capsule Inspection Cum Polishing Machine
It has three sections as described below.
Feeding Section
The section consists of the followings:
Hopper.
Dry powder collector made of Stainless steel.
Inspection Section:
The section consists of a vary speed conveyor.
The capsules while moving on the conveyor revolve along
their axis due to the angular guides, thus can be inspected.
Polishing Inspection:
This section is constituted of:
Filter cloth.
Revolving variable speed spiral nylon brush.
Stainless steel powder collector.
Vacuum dust collector.
Each capsule is polished twice, in two chambers,
thus imparting a glossy finish.
Capsule Filling Machine
(Semi Automatic)
Machine is suitable for filling capsules of all sizes with powders,
pellets or granules. It has a double feeding arrangement which
enables higher productivity. The output of the machine varies
from 30,000 to 50,000 capsules/hr depending on the quality
of capsules, characteristics of the filling material and ambient
temperature condition.
SALIENT FEATURES
Variable filling table speed for dosage accuracy.
Automatic drug hopper in-feed mechanism to eliminate
variations. Choice of 4 speeds to handle variety of powders
from hygroscopic to free flowing.
Automatic capsule closing system ensures faster and safer
closing and ejection of filled capsules. Programmable Logic
Control System